Teltonika TRB141 industrielles, robustes, GPIO LTE-Gateway
107,95 €*
% 127,00 €* (15% gespart)Sofort verfügbar, Lieferzeit: 1-3 Tage
Produktnummer:
TRB141003000
Produktinformationen "Teltonika TRB141 industrielles, robustes, GPIO LTE-Gateway"
Kleines industrielles LTE Cat 1-Gateway. Ausgestattet mit verschiedenen Inputs/Outputs und einem Micro-USB Port,
einschließlich Digital, Relay, Analog und Isolated. Perfekt für Anwendungsfälle,
in denen Geräte über I/O aus der Ferne verwaltet werden müssen.
| MOBILE |
|
| Mobile module | 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
| SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White list | Operator black/white list |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock, Used band status display |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough |
Router assigns its mobile WAN IP address to another device on LAN |
| NETWORK |
|
| Routing | Static routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP Relay |
| Network backup | Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| MODBUS TCP SLAVE |
|
| ID range | Respond to one ID in range [1;255] or any |
| Allow Remote Access | Allow access through WAN |
| Custom registers |
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality |
| MODBUS TCP MASTER |
|
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats |
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
| DATA TO SERVER |
|
| Protocol |
HTTP(S), MQTT, Azure MQTT |
| MQTT GATEWAY |
|
| MQTT Gateway |
Allows sending commands and receiving data from MODBUS Master through MQTT broker |
| DNP3 |
|
| Supported modes |
TCP Master, DNP3 Outstation |
| SYSTEM CHARACTERISTICS |
|
| CPU | ARM Cortex-A7 1.2 GHz |
| RAM | 128 MB, DDR2 |
| FLASH storage |
512 MB, SPI Flash |
| INPUT / OUTPUT |
|
| Input | 2 x Digital inputs (configurable passive or active), 1 x Isolated input, 1 x Analog input ( with 4-20 mA capability). 1 x Configurable Inputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high |
| Output | 2 x Relay outputs (latching and non latching). 1 x Configurable Output, Open collector output, max output 30 V, 300 mA |
| Events | Email, RMS, SMS |
| I/O juggler |
Allows to set certain I/O conditions to initiate event |
| POWER |
|
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max |
| Power consumption |
< 5 W |
| PHYSICAL INTERFACES |
|
| I/O’s | 3 x Digital Inputs, 1 x Analog input, 2 x Relays on 16 pin connector, 2 x I/O pins on 4 pin power connector |
| Status LEDs | 3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED |
| SIM | 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V |
| Power | 1 x 4-pin power connector |
| 1-Wire | 1 x 1-Wire interface on 16 pin connector |
| Antennas | 1 x SMA for LTE |
| USB | 1 x Virtual network interface via micro USB |
| Reset |
Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION |
|
| Casing material | Aluminium housing |
| Dimensions (W x H x D) | 74.5 x 25 x 64.4 mm |
| Weight | 136 g |
| Mounting options |
Bottom and sideways DIN rail, Flat surface |
| OPERATING ENVIRONMENT |
|
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
| PACKAGE CONTAINS |
|
|
|
| Mobilfunkstandards: | 2G, 3G, 4G |
|---|
Anmelden
Zubehör
%
APMON Erweiterte Überwachung der Partikelablagerung
20.900,00 €*
22.000,00 €*
(5% gespart)
APMON: Erweiterter Partikel Ablagerungswächter: Der APMON zählt in Echtzeit abgelagerte Partikelgrößen größer als 15 µm alle 5 Minuten.Der APMON liefert 24/7 Daten.Benutzerfreundliche Software bietet wertvolle Informationen in klarer Übersicht.Der APMON zählt und bestimmt die unbekannte Bedrohung Ihres Produkts.Der APMON überwacht den Einfluss Ihres Reinraumes auf Ihr Produkt.Geringe Kosten. Der APMON-Sensor ist ein holographisches Messinstrument.Die erfassten Daten werden in verschiedenen Bildschirmen angezeigt. Der APMON überwacht:Permanent das direkte Risiko einer ProduktkontaminationPartikel, die Ihr Produkt verunreinigen könnenDaten (Teilchengrößen und Abscheidemomente), um Ursachen der Partikelablagerung zu findenDie Zeit und Dauer in der des Produkts gefährdet istDie Auswirkungen der Nutzung Ihres Reinraums Inhalt Die APMON-Sensorbox enthält die folgenden Artikel:1x APMON Sensor1x Disposable witness cartridge1x 9 Vdc power Adapter2x APMON sensor batteries Der Koffer der Basiseinheit enthält die folgenden Artikel:1x APMON base unit1x 19 Vdc power adapter1x sensor cable1x remote access cable 1x user quide
Teltonika TSW202
111,96 €*
MANAGED PoE+ SWITCH
Der TSW202 ist der erste Managed PoE+ Switch von Teltonika Networks, der granulare Netzwerkmanagementfunktionen bietet und gleichzeitig die Stromverteilung zentralisiert. Dieser PoE+ Switch bietet Flexibilität in Bezug auf Lösungsmanagement und Stromversorgung und verbessert die M2M-Kommunikation durch die Unterstützung einer breiten Palette von Industrieprotokollen, einschließlich EtherNet/IP, Profinet und MRP. Der TSW202 verfügt über 2 Hochleistungs-SFP-Ports für Glasfaserkommunikation mit großer Reichweite und 8 Gigabit-Ethernet-Ports mit jeweils 30 W Leistung.
ETHERNET
ETH
Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover
Fibre
2 x SFP ports
IEEE 802.3 series standards
IEEE 802.1p, IEEE 802.1Q, 802.3az
POE OUT
PoE ports
Port 1 - 8
PoE standards
802.3af and 802.3at Alternative B
PoE Max Power per Port (at PSE)
30 W
Total PoE Power Budget (at PSE)
240 W
Maximum Ethernet cable length
100 m
SERVICES
EtherNet/IP
Yes
Profinet (class B)
Yes
SNMP V2, V3
Yes
LLDP
Yes
SYSTEM CHARACTERISTICS
RAM
128MB, DDR3
FLASH storage
16 MB serial flash
NETWORK
MRP
MRP client role, MRP manager role
L2 features
Loop protection, Forwarding table, VLAN, STP/RSTP
DHCP
DHCP server, DHCP client
Port Settings
Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring
L3 Features
Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address
POWER
Connector
2-pin industrial DC power socket
Input voltage range
7 – 57 VDC
PoE (passive)
44 – 57 VDC
Power consumption
Idle: < 3 W / Max: 8 W / PoE Max: 248 W
PHYSICAL INTERFACES
Ethernet
8 x RJ45 ports, 10/100/1000 Mbps
Fibre
2 x SFP ports
Status LEDs
1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs
Power
1 x 2-pin industrial DC power socket
Reset
Software reset button
Other
1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material
Anodized aluminum housing and panels
Dimensions (W x H x D)
132 x 44.2 x 122.2 mm
Weight
610 g
Mounting options
Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement
PACKAGE CONTAINS*
TSW202
QSG (Quick Start Guide)
Packaging box
*Standard package contents may differ based on standard order codes.
Teltonika PR1KC640 5G COMBO MIMO MOBILE/GNSS/ WIFI DACH-SMA-ANTENNE
99,50 €*
MECHANICAL/ENVIRONMENTAL
Mounting method
Screw
Radome ingress protection rating
IP65 (exclude cable outlet)
Radome material
UV-Resistant ABS/PC
Housing dimensions
189 x 182 x 85 mm
Cable
7 x LMR100, 3000 mm
Operating temperature
- 40 ~ +85 °C
Weight
535 ± 10 g
Recomended mounting dimensions
Hole ø28 mm, panel thickness MAX 8 mm
RoHS Compliant
✓
5G MOBILE MIMO ANTENNA
Frequency Range
617 - 960 / 1710 - 2690 / 2900 - 4200 MHz
Polarization
Linear
Gain
4.0 dBi
V.S.W.R
≤3.0
Impedance
50 Ω
Connector type and count
4x SMA Male
GNSS ANTENNA
Frequency range
1164 - 1300 / 1559 - 1610 MHz
Polarization
RHCP
LNA Gain
40 ± 2 dB
V.S.W.R
< 2.0
Impedance
50 Ω
Supply voltage
3 - 12 VDC
Current consumption
≤60 mA
Connector type and count
SMA Male
WIFI MIMO ANTENNA
Frequency range
2400 - 2483.5 / 4900 - 5925 MHz
Polarization
Linear
Gain
4.0 dBi
V.S.W.R
< 2.5
Impedance
50 Ω
Connector type and count
2x RP-SMA Male
Datasheet
