Teltonika TRB142 Industrie LTE Gateway mit RS232 Anschluss - EU version
99,70 €*
% 104,90 €* (4.96% gespart)Sofort verfügbar, Lieferzeit: 1-3 Tage
Produktnummer:
TRB142003000
Produktinformationen "Teltonika TRB142 Industrie LTE Gateway mit RS232 Anschluss - EU version"
TRB142 verfügt über eine häufig verwendete RS232-Schnittstelle für die Fernverwaltung.
Es ist mit geschäftskritischen LTE Cat 1-Funktionen und Software ausgestattet
die auf OpenWRT basiert und somit ein hohes Maß an Anpassungsfähigkeit bietet.
| MOBILE |
|
| Mobile module | 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
| Status | IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC |
| SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White list | Operator black/white list (by country or separate operators) |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock, Used band status display |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough |
Gateway assigns its mobile WAN IP address to another device on LAN |
| NETWORK |
|
| Routing | Static routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules |
| Firewall status page | View all your Firewall statistics, rules, and rule counters |
| Ports management | View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on |
| Network topology | Visual representation of your network, showing which devices are connected to which other devices |
| DHCP | Static and dynamic IP allocation, DHCP Relay |
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | Supported >25 service providers, others can be configured manually |
| Network backup | Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| MODBUS |
|
| Supported modes | Server, Client |
| Supported connection types | TCP, RTU(RS232) |
| Custom registers |
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality |
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| DATA TO SERVER |
|
| Protocol |
HTTP(S), MQTT, Azure MQTT, Kinesis |
| Data to server | Extract parameters from multiple sources and different protocols, and send them all to a single server |
| MQTT GATEWAY |
|
| MQTT Gateway |
Allows sending commands and receiving data from MODBUS Server through MQTT broker |
| DNP3 |
|
| Supported modes |
TCP Master, DNP3 Outstation, RTU Master |
| SYSTEM CHARACTERISTICS |
|
| CPU | ARM Cortex-A7 1.2 GHz |
| RAM | 128 MB, DDR2 |
| FLASH storage |
512 MB, SPI Flash |
| INPUT / OUTPUT |
|
| Input |
2 x Configurable Inputs/Outputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high. Open collector
Configurable I/O output, max output 30 V, 300 mA. Configurable Inputs/Outputs are not available in TRB142*2**** |
| Output | HTTP POST/GET, Schedule |
| Events | Email, RMS, SMS |
| I/O juggler |
Allows to set certain I/O conditions to initiate event |
| POWER |
|
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max |
| Power consumption |
< 5 W |
| PHYSICAL INTERFACES |
|
| I/O’s | 2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB142*2****) |
| Status LEDs | 3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED |
| SIM | 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V |
| Power | 1 x 4-pin power connector |
| Antennas | 1 x SMA for LTE |
| USB | 1 x Virtual network interface via micro USB |
| RS232 | 1 x DB9 socket |
| Reset |
Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION |
|
| Casing material | Aluminium housing |
| Dimensions (W x H x D) | 74.5 x 25 x 64.4 mm |
| Weight | 135 g |
| Mounting options |
Bottom and sideways DIN rail, Flat surface |
| OPERATING ENVIRONMENT |
|
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
| PACKAGE CONTAINS |
|
|
|
| Mobilfunkstandards: | 2G, 3G, 4G |
|---|
Anmelden