#
Skip to main content

Teltonika RUT951

Product information "Teltonika RUT951"

industrial cellular Router

RUT951 features dual-SIM cellular connectivity combined with WI-FI and four Ethernet interfaces to meet the needs of the most varied IoT scenarios. Powered by RutOS, this router offers advanced customization options, automation features, and top-level security for your solution.

 
 
 
 
MOBILE
 
 
Mobile module4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – UP to 236.8 kbps
SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS

 
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSDSupports sending and reading Unstructured Supplementary Service Data messages
Black/White listOperator black/white list
Multiple PDNPossibility to use different PDNs for multiple network access and services
Band managementBand lock, Used band status display
APNAuto APN
BridgeDirect connection (bridge) between mobile ISP and device on LAN
Passthrough


 
Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
 
 
Wireless modeIEEE 802.11b/g/n/, Access Point (AP), Station (STA)
WiFi securityWPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID/ESSIDSSID stealth mode and access control based on MAC address
WiFi usersUp to 100 simultaneous connections
Wireless Hotspot


 
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
 
 
WAN1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN

 
3 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
MODBUS TCP SLAVE
 
 
ID rangeRespond to one ID in range [1;255] or any
Allow Remote AccessAllow access through WAN
Custom registers

 
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
 
 
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats

 
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
 
Protocol

 
HTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
 
 
MQTT Gateway

 
Allows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3
 
 
Supported modes

 
TCP Master, DNP3 Outstation
SYSTEM CHARACTERISTICS
 
CPUMediatek MIPS 24Kc 580 MHz
RAM128 MB, DDR2
FLASH storage

 
16 MB, SPI Flash
INPUT / OUTPUT
 
 
Input1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
EventsEmail, RMS, SMS
I/O juggler

 
Allows to set certain I/O conditions to initiate event
POWER
 
 
Connector4-pin industrial DC power socket
Input voltage range9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC
Power consumption

 
< 2 W idle, < 7 W Max
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS; SIM)
 
Ethernet4 x RJ45 ports, 10/100 Mbps
I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
Status LEDs1 x bi- color connection status LED, 5 x Connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
SIM2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
Antennas2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors
Reset

 
Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
 
Casing materialAluminium housing, plastic panels
Dimensions (W x H x D)110 x 50 x 100 mm
Weight287 g
Mounting options

 
DIN rail (can be mounted on two sides), flat surface placement
PACKAGE CONTAINS
 
 
  • Router RUT951
  • 9 W EU PSU
  • 2x LTE antennas (swivel, SMA male)
  • 2 x WiFi antenna (swivel, RP-SMA mal)
  • Ethernet cable (1.5 m)
  • SIM Adapter kit
  • QSG (Quick Start Guide)
  • Packaging box


 

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.