Teltonika TRB141 industrial rugged GPIO LTE Gateway
€99.06*
% €127.00* (22% saved)Available, delivery time: 1-3 days
Product number:
TRB141003000
Product information "Teltonika TRB141 industrial rugged GPIO LTE Gateway"
TRB141 is a small industrial LTE Cat 1 gateway equipped with diverse inputs/outputs and a Micro USB port.
This gateway comes with secure, highly customizable RutOS and works perfectly for remote management of devices and applications using I/O.
| MOBILE | |
| Mobile module | 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White list | Operator black/white list |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock, Used band status display |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
| NETWORK | |
| Routing | Static routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP Relay |
| Network backup | Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| MODBUS TCP SLAVE | |
| ID range | Respond to one ID in range [1;255] or any |
| Allow Remote Access | Allow access through WAN |
| Custom registers | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality |
| MODBUS TCP MASTER | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
| DATA TO SERVER | |
| Protocol | HTTP(S), MQTT, Azure MQTT |
| MQTT GATEWAY | |
| MQTT Gateway | Allows sending commands and receiving data from MODBUS Master through MQTT broker |
| DNP3 | |
| Supported modes | TCP Master, DNP3 Outstation |
| SYSTEM CHARACTERISTICS | |
| CPU | ARM Cortex-A7 1.2 GHz |
| RAM | 128 MB, DDR2 |
| FLASH storage | 512 MB, SPI Flash |
| INPUT / OUTPUT | |
| Input | 2 x Digital inputs (configurable passive or active), 1 x Isolated input, 1 x Analog input ( with 4-20 mA capability). 1 x Configurable Inputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high |
| Output | 2 x Relay outputs (latching and non latching). 1 x Configurable Output, Open collector output, max output 30 V, 300 mA |
| Events | Email, RMS, SMS |
| I/O juggler | Allows to set certain I/O conditions to initiate event |
| POWER | |
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max |
| Power consumption | < 5 W |
| PHYSICAL INTERFACES | |
| I/O’s | 3 x Digital Inputs, 1 x Analog input, 2 x Relays on 16 pin connector, 2 x I/O pins on 4 pin power connector |
| Status LEDs | 3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED |
| SIM | 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V |
| Power | 1 x 4-pin power connector |
| 1-Wire | 1 x 1-Wire interface on 16 pin connector |
| Antennas | 1 x SMA for LTE |
| USB | 1 x Virtual network interface via micro USB |
| Reset | Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminium housing |
| Dimensions (W x H x D) | 74.5 x 25 x 64.4 mm |
| Weight | 136 g |
| Mounting options | Bottom and sideways DIN rail, Flat surface |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
| PACKAGE CONTAINS | |
| |
| Mobilfunkstandards: | 2G, 3G, 4G |
|---|
Login
Zubehör
Teltonika TSW202
€128.00*
MANAGED PoE+ SWITCH
TSW202 is the first-ever Teltonika Networks managed PoE+ switch, designed to provide granular network management capabilities while centralizing power distribution. This PoE+ switch enables flexibility over solution management and power supply and enhances M2M communication by supporting a wide range of industrial protocols, including EtherNet/IP, Profinet, and MRP. The TSW202 has 2 high-performance SFP ports for long-range fibre optic communication and 8 Gigabit Ethernet ports providing 30 W of power each.
ETHERNET ETHMulti-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossoverFibre2 x SFP portsIEEE 802.3 series standards IEEE 802.1p, IEEE 802.1Q, 802.3azPOE OUT PoE portsPort 1 - 8PoE standards802.3af and 802.3at Alternative BPoE Max Power per Port (at PSE)30 WTotal PoE Power Budget (at PSE) 240 WMaximum Ethernet cable length100 m SERVICES EtherNet/IPYesProfinet (class B)YesSNMP V2, V3YesLLDPYes SYSTEM CHARACTERISTICS RAM128MB, DDR3FLASH storage 16 MB serial flashNETWORK MRPMRP client role, MRP manager roleL2 featuresLoop protection, Forwarding table, VLAN, STP/RSTPDHCPDHCP server, DHCP clientPort Settings Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port MirroringL3 Features Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 addressPOWER Connector2-pin industrial DC power socketInput voltage range7 – 57 VDCPoE (passive)44 – 57 VDCPower consumption Idle: < 3 W / Max: 8 W / PoE Max: 248 WPHYSICAL INTERFACES Ethernet8 x RJ45 ports, 10/100/1000 MbpsFibre2 x SFP portsStatus LEDs1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDsPower1 x 2-pin industrial DC power socketResetSoftware reset buttonOther1 x Grounding screw PHYSICAL SPECIFICATION Casing materialAnodized aluminum housing and panelsDimensions (W x H x D)132 x 44.2 x 122.2 mmWeight610 gMounting options Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placementPACKAGE CONTAINS* TSW202QSG (Quick Start Guide)Packaging box *Standard package contents may differ based on standard order codes.
%
TSW200 industrial POE+ Ethernet Switch
€101.20*
€110.00*
(8% saved)
Datasheet
TSW200 is an industrial Ethernet switch with 2 SFP ports for long-range Fiber-optic communication and 8 Gigabit Ethernet ports
that support IEEE802.af and IEE802.3at Power-over-Ethernet standards. Classified as power source equipment (PSE),
it enables the centralization of the power supply, providing up to 30 watts per port and reducing the effort to install power.
ETHERNET LAN8 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossoverFibre2 x SFP portsIEEE 802.3 series standards 802.3i, 802.3u, 802.3ab, 802.3x, 802.3azPERFORMANCE SPECIFICATIONS Bandwidth (Non-blocking)20 GbpsMAC address table size2K entriesJumbo frame support9216 bytesPacker buffer128 KB POE OUT PoE portsPort 1- 8PoE Max Power per Port (at PSE)30 WPoE standards802.3af and 802.3at Alternative BTotal PoE Power Budget (at PSE)240 W POWER Connector2-pin industrial DC power socketInput voltage range7 – 57 VDCPoE-out input voltage range44 – 57 VDCPower consumption Idle: 1.81 W / Max: 5.5 W / PoE Max: 245.5 WPHYSICAL INTERFACES Ethernet8 x RJ45 ports, 10/100/1000 MbpsFibre2 x SFP portsStatus LEDs1 x Power LED, 16 x ETH status LEDs 2 x SFP status LEDsPower1 x 2-pin industrial DC power socketOther1 x Grounding screw PHYSICAL SPECIFICATION Casing materialFull aluminium housingDimensions (W x H x D)132 x 44.2 x 95.1 mmWeight517 gMounting options DIN rail or wall mounting (additional kit needed), flat surface placementPACKAGE CONTAINS TSW200QSG (Quick Start Guide)Packaging box
Teltonika PR1KC640 5G COMBO MIMO MOBILE/GNSS/WIFI ROOF SMA ANTENNA
€99.50*
MECHANICAL/ENVIRONMENTAL Mounting methodScrewRadome ingress protection ratingIP65 (exclude cable outlet)Radome materialUV-Resistant ABS/PCHousing dimensions189 x 182 x 85 mmCable7 x LMR100, 3000 mmOperating temperature- 40 ~ +85 °CWeight535 ± 10 gRecomended mounting dimensionsHole ø28 mm, panel thickness MAX 8 mmRoHS Compliant✓ 5G MOBILE MIMO ANTENNA Frequency Range617 - 960 / 1710 - 2690 / 2900 - 4200 MHzPolarizationLinearGain4.0 dBiV.S.W.R≤3.0Impedance50 ΩConnector type and count4x SMA Male GNSS ANTENNA Frequency range1164 - 1300 / 1559 - 1610 MHzPolarizationRHCPLNA Gain40 ± 2 dBV.S.W.R< 2.0Impedance50 ΩSupply voltage3 - 12 VDCCurrent consumption≤60 mAConnector type and count SMA MaleWIFI MIMO ANTENNA Frequency range2400 - 2483.5 / 4900 - 5925 MHzPolarization LinearGain4.0 dBiV.S.W.R< 2.5Impedance50 ΩConnector type and count2x RP-SMA Male
%
Teltonika TSW100 industrial POE+ Ethernet Switch
€94.00*
€100.00*
(6% saved)
Datasheet TSW100 is an unmanaged Gigabit Ethernet switch supporting Power-over-Ethernet. Classified as power source equipment (PSE),it centralizes the power supply, providing up to 30 watts per port and reducing installation effort.Five Gigabit Ethernet ports provide an economical high-bandwidth solution for a secure industrial Ethernet network. ETHERNET LAN5 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossoverIEEE 802.3 series standards 802.3i, 802.3u, 802.3ab, 802.3x, 802.3azPERFORMANCE SPECIFICATIONS Bandwidth (Non-blocking)10 GbpsMAC address table size2K entriesPacker buffer128 KB POE OUT PoE portsPort 1- 4PoE Max Power per Port (at PSE)30 WPoE standards802.3af and 802.3at Alternative BPoE Power Budget (at PSE)120 W POWER Connector2-pin industrial DC power socketInput voltage range7 – 57 VDCPoE-out input voltage range44 – 57 VDCPower consumption Idle: 2 W / Max (no PoE): 9 W / PoE Max: 129 WPHYSICAL INTERFACES Ethernet5 x RJ45 ports, 10/100/1000 MbpsStatus LEDs1 x Power LED, 10 x ETH status LEDsPower1 x 4-pin power connectorOther1 x Grounding screw PHYSICAL SPECIFICATION Casing materialFull aluminium housingDimensions (W x H x D)115 x 32 x 95 mmWeight350 gMounting options DIN rail or wall mounting (additional kit needed), flat surface placementPACKAGE CONTAINS TSW10062 W EU PSU PR3PWEU3QSG (Quick Start Guide)Packaging box